Fitting Guide
Installation Instructions
Before installation, please read these instructions carefully. Proper installation of the covers guarantees long-term aesthetics of the interior and ensures correct operation of the airbags.
Airbag Safety Warning
Due to airbag safety, seat covers must be installed only on seats equipped with side airbags. Some elements of the covers are designed to be installed only with basic tools and skills. Install the covers carefully to ensure that they do not interfere with the airbag and do not affect its deployment. The manufacturer is not responsible for any damage resulting from use inconsistent with its intended purpose, including installation of the covers in seats where it is not recommended, or failure to follow these instructions.
Step-by-Step Installation
Fit the Cover
Place the seat cover on the seat, matching it to the shape and size of the seat. Position the material evenly and smooth out any wrinkles. Start by pulling the cover over the upper part of the backrest. Make sure the cover is properly aligned all around the seat and that the openings for headrest mounting are in the correct place.
Cut Control Openings
Using scissors, make incisions in the side seams of the backrest cover where the adjustment levers and other control elements are located. Make sure the openings are precisely aligned with the seat controls.
Attach the Velcro
Attach the Velcro fastening beneath the seat cushion and pull the cover tightly over the edges. Smooth out the material to evenly distribute the cover and eliminate wrinkles. Adjust the material to the shape of the seat so that it fits perfectly on all sides.
Secure Under the Seat
Secure the cover using the elastic hooks under the seat. Hook the straps to the seat frame evenly.
Finish the Headrests
Make the necessary openings for the headrests by carefully cutting the material along the stitching. Do not cut too close to the seams. Make sure the openings are neat and properly finished. Adjust the headrests and make sure they are stable and correctly mounted.
Preparing the Openings
Follow these detailed steps when cutting the openings for rear seat headrests, seat belts and tilting levers.
Rear Seat Headrests
- 1After carefully fitting the cover to the seat and unfolding the material, make an incision in the place where the headrest mounting is located.
- 2Cut an opening according to the shape and size of the headrest mounting.
- 3Slide the material under the headrest mounting and pass it through.
- 4After carefully fitting the material and making any necessary adjustments, the headrest opening is finished.
Seat Belts
- 1After carefully fitting the cover to the seat and unfolding the material, make an incision in the place where the seat belt is located.
- 2Cut an opening according to the belt shape and size to ensure proper belt operation.
- 3Slide the material under the belt buckle and pass it through the opening.
- 4After carefully fitting the material and making any necessary adjustments, the opening is finished and allows free use of the belt.
Tilting Levers
- 1After carefully fitting the cover to the seat and unfolding the material, make an incision in the place where the lever is located.
- 2Cut an opening according to the shape and size of the lever to ensure its proper operation.
- 3Slide the material under the lever and pass it through the opening.
- 4After carefully fitting the material and making any necessary adjustments, the opening is finished and allows free operation of the lever.
Supported Car Models
Our covers are made for a wide range of makes and models — from Alfa Romeo to Volvo. Check the full list to confirm your vehicle is supported.
Material & Care
- Product material: 100% polyester.
- Machine wash at 30°C.
- Do not bleach.
- Do not iron.
- Do not dry clean.
Manufacturer
Leather Seat Covers Ltd · Unit 229, Blanchardstown Corporate Park 2,
Ballycoolin Road, Dublin 15, D15 Y7EH, Ireland